How to use various audio effects such as compression, equalization, reverb, etc. to produce a professional mix. Most of these effects are available as part of a software or is also available as a piece of hardware. Make your mix sound better using these audio effects; this is an important lesson as part of our studio tips and tricks series.
Audio compression
Audio compression is used to reduce the difference between the highs and the lows of an audio waveform to get a more punchy / tight sound. Compression makes the sounds appear ‘fatter’ and with more ‘punch’.
If you have spent even some time recording your own stuff, I’m sure you would have observed that somehow the mix that you’ve made doesn’t sound tight. It just doesn’t sound like the recordings that you hear nowadays. In fact, you might be thinking that it sounds like the recordings from the 1960s or 1970s. If you have been thinking that way, then your observation is indeed correct.
When you apply the compressor effect for the first time, you’ll be really happy to hear your mix (after applying audio compression).
But what has happened over the years is that music producers are over-doing it; they are now engaged in a race where everyone wants their songs to sound “punchier” than the last guys. The overall volume of songs has gone much higher than the tracks that were recorded several decades back.
Be it movies, advertisements on TV, or dance songs, they are compressed to make them sound louder and to make them stand out, to make you listen.
Notice how when you’re watching television, all the commercials sound so loud, almost as if they are going to knocks your ears out. You really have to grab the remote to reduce the volume!
Nevertheless, it’s an important concept to learn because the right amount of compression is required for any audio mix.
When learning about Audio Compression, it’s also important to know about the term – “dynamic range”.
If you take any old recording, preferably from the 60s to 70s, something that is catchy, fast-paced, and has lots of instruments including trumpets, you’ll hear that in certain sections of the song, the volume seems to be a bit high or is clipped, compared to the rest of the sections. You might suddenly feel the need to reduce the volume.
So what is happening here; is there any problem with the recording? Not really, it’s just that the dynamic range of the song is too high.
Simply put, a dynamic range is the range of volume that any particular sound has, from the lowest frequencies to the highest.
Usually, at the lowest frequencies the recording equipment may also pick up some background noise, and at the highest frequencies it may also pick up breath sounds, and may not sound consistent with the rest of the sections.
This is where a compressor really helps!
A compressor essentially reduces the dynamic range. It makes the difference between the loud bits and the quiet bits, smaller. If you have looked at a waveform on any digital audio software then imagine the peaks becoming closer to the troughs.
The range of volume (dynamic) is lowered.
Once the compressor has compressed the dynamic range, you now have some bandwidth left to increase the overall volume. This is where you need to turn it all up!
This is done using the Gain make-up.
It’s like a volume control for the compressor. This makes it possible to boost the lower sounds so that they become more audible.
If you are using a compressor for your recorded music and are unable to see any reduction, then you may have to probably lower the threshold-value to notice any gain reduction. That’s the way the compressor works; it won’t come into action until the audio-volume actually peaks over the threshold.
So if you think the compressor is not actually coming into play, you may have to play around with the controls till the peak of the audio goes over the threshold you have set on the compressor, if you want any gain reduction to happen.
Equalization
You may have already fiddled with this thing on your favorite music player, be it on the computer or any other mp3 player. This effect that helps you give different color to the sound.
Equalization is the process where you strengthen (boost) or weaken (cut) certain frequencies in your sound.
With this, you are basically trying to adjusting the balance between the frequency components within an electronic signal. You do this using the equipment known as equalizer. It can be a hardware or a piece of software that lets you do that.
Types of Equalizers
There are several kinds of equalizers (EQs), here are the more popular ones:
- Shelving
- Parametric / semi-parametric equalizer
- Graphic equalizer
Here’s a nice tutorial video explaining the concept of Equalization:
Understanding Mastering
Video tutorial explaining the basics of Mastering
One of the more common challenges with the mastering scenario today is dealing with the “loudness” phenomenon, where everybody wants their songs to sound louder.
Overdoing compression is the norm and people have forgotten how important dynamics are. One needs to remember that mastering involves making subtle enhancements to the tracks, and not changing them completely.
For instance how loud any song should be also really depends on the genre of the music.
If the music genre is something like jazz, classical, indie folk, etc, then the loudness levels has to be different from say metal and other types of dance music where loudness is equally or more important than dynamics.
Masters have become louder and louder, at the expense of the music becoming harsh and lacking punch and dynamics. One of the main causes of this epidemic is the use of the Peak Limiter to achieve increased levels in the mastering stage. Peak limiters attenuate transients and often reduce punch, stereo imaging, can greatly alter mix balances, and cause a fatiguing result to the ears.
Most of the software allows you to easily tidy up the sound quality of mastered or un-mastered recordings while preserving the original intent of the producer and/or recording engineer.
Closing Thoughts
Audio effects such as compression can be a difficult concept to understand initially, as you just expect your recordings to sound great just by buying recording equipment. That is why I often say that buying equipment is only one half of the solution; you need to learn to use the various effects well to produce a nice sounding mix, based on various genres.
In order to improve at producing better mixes, you should start listening carefully to your mix. Use your digital audio editor to examine wave-forms, and apply various effects to see how it affects the sound. With experience and more understanding of the various effects, you will graduate one level above from being a beginner.
KeytarHQ editorial team includes musicians who write and review products for pianists, keyboardists, guitarists & other musicians. KeytarHQ is the best online resource for information on keyboards, pianos, synths, keytars, guitars and music gear for musicians of all abilities, ages and interests.
Leave a Reply